civil engineering
Firouz Karamshahi; ebrahim nohani; Mohammad Hossein Noorolah Dezfouli
Abstract
Concrete is one of the most widely used materials in construction, and the reason for that is its hardness, durability and high resistance. Pores are usually filled with fluid. So far, nanostructures with regular and irregular shapes have been made from different materials, which in total form one of ...
Read More
Concrete is one of the most widely used materials in construction, and the reason for that is its hardness, durability and high resistance. Pores are usually filled with fluid. So far, nanostructures with regular and irregular shapes have been made from different materials, which in total form one of the most diverse categories of materials. In this regard, 30 samples were made and tested for compressive strength testing and 30 samples for tensile testing. The amount of nanosilica and nanoclay in three different ratios of 0.25, 0.50, and 0.75 of cement weight has been added to the concrete mixture. The obtained results show an increase in the compressive and tensile strength of concrete due to the addition of nanosilica and nanoclay
farhad pirmohammadi alishah; Navid Mahmoudzadeh
Volume 2, Issue 5 , August 2020, , Pages 87-109
Abstract
Plastic concrete have been used for some four decades in watertight structures. In these four decades, plastic concrete has been successfully used in engineering control projects for seepage. Plastic concrete is produced by mixing of cement, bentonite, aggregates and water. Presence of bentonite and ...
Read More
Plastic concrete have been used for some four decades in watertight structures. In these four decades, plastic concrete has been successfully used in engineering control projects for seepage. Plastic concrete is produced by mixing of cement, bentonite, aggregates and water. Presence of bentonite and high water-cement ratio is difference between plastic concrete and conventional concrete. These two factor cause plastic concrete, besides possession of water tighting property, have a very lesser comperssive strength and modulus of elasticity in comparsion with conventional concrete and therefore be more deformable. Researches that fulfilled on this type of concrete in the word and especially in Iran, were not extensive and most of done works have been typical studies on relative projects. In order to make more economical plastic concrete, it is necessary to evaluate the effects of changes in the properties of bentonite, and in particular the effect of its plastic index change, and given that there is no extensive research in this field in our country, we try to move toward this goal in this these. Therefore after primary stduies and test, 51 mix designs were teseted and compressive strength, modulus of elasticity and workability of them were determined. Based on the results, with increasing amount of plastic index of bentonite, compressive strength, elasticity modulus and workability decrease.